Softbox-Mount Eggcrate
$39.90 – $109.90
Our Softbox-Mount Eggcrate is designed to be mounted directly on our 1X1 and 1X3 flexible panels and around our 3×3 frames. This narrows the light beam to 40 degrees, while maintaining the full, un-diffused intensity of the light. This keeps the focus of the light on the subject and prevents it from spilling into the lens or background.
Our Softbox-Mount Eggcrate is designed to be mounted directly on our 1X1 and 1X3 flexible panels and around our 3×3 frames. This narrows the light beam to 40 degrees, while maintaining the full, un-diffused intensity of the light. This keeps the focus of the light on the subject and prevents it from spilling into the lens or background.
| Weight | 1 lbs |
|---|---|
| Dimensions | 13 × 11 × 1 in |
| Options | Softbox-Mount Eggcrate for 1×1 Fixtures FP-1x1_EG ($39.90), Softbox-Mount Eggcrate for 1×3 Fixtures FP-1x3_EG ($59.90), Softbox-Mount Eggcrate for 3×3 Fixtures FP-3x3_EG ($109.90) |
Be the first to review “Softbox-Mount Eggcrate”
You must be logged in to post a review.
Related products
Accessories
The Bi-Color Drivers are available for the 1x3 and 1x1 LED DP Lumi light panels. You can choose from either G-Mount or V-mount options. *Please note the 1x3 Drivers does require a 30V Battery. 1x1 can use the standard 14V battery.
This product has multiple variants. The options may be chosen on the product page
Accessories
Professional lighting on-the-go has never been more accessible than it is today, with DP Lumi’s Collapsible X-Bracket. Paired with DP Lumi’s high quality flexible light panels and state-of-the-art drivers, you can now carry the power of a full 1X3 DP Lumi light setup in the space of a back-pack, thanks to the DP Lumi Collapsible X-Bracket.
Accessories
The DP Lumi Extension Cables provide 9-30 feet of extra reach for our LED light panels. The cables have the same connectors as our lights, and are constructed from the same high-quality materials as the cables on your DP Lumi lights. If additional length is needed, up to two of these cables can be connected with no loss of quality.
This product has multiple variants. The options may be chosen on the product page
Accessories
The Daylight Drivers are available for the 1x3 and 1x1 LED DP Lumi light panels. You can choose from either G-Mount or V-mount options. *Please note the 1x3 Drivers does require a 30V Battery. 1x1 can use the standard 14V battery.
This product has multiple variants. The options may be chosen on the product page
Accessories
The DP Lumi Surface-Eggcrate is designed to go directly onto our LED panels. They are made from a sturdy, yet flexible cloth material and helps control the spread of light. It stops the light from spilling over adding directional control and keeping your light focus on your subject.
This product has multiple variants. The options may be chosen on the product page
Accessories
This Heavy Duty 5/8 Swivel Pin adds articulation to your light stand giving you the option to turn you lights horizontally, vertically or facing up and down. One end slips onto a male 5/8" pin while the other supports our light panels with a 5/8" receiver. The ball joint allows 180° swivel of the fixture, while the large, rubber-covered T-handle provides secure locking in your chosen position. The barrel at the receiver end measures 1 1/8". Removing the tightening knob from it allows you to drop it into a 1 1/8" receiver.
Accessories
- 190wH V-Mount Battery providing approximately 1hr 20 minutes of power to the 1x3 Daylight and Bi-Color panels at 100% Intensity
- Includes fast charger
- In Stock and ready to ship!
Accessories
The Telescoping Pipe Clamp is designed for use with our light weight LED Light fixtures weighing no more than 25 lbs.(11.4kg.) Engineered to telescope from the grid with nominal ceiling clearance. Telescoping Pipe Clamps are for both temporary and permanent placement of lighting fixtures. Constructed of aluminum with internally welded safety collars and cast aluminum [...]
Reviews
There are no reviews yet.